SITEMAP
   
 
                                                                                               Support | Sales Contact | Marketing Contact
                              Press Releases | Event | Awards | Gallery
                                                                  About Enermax | Milestones | Investors Relations
Power Supply
Case
Peripheral
Audio
Fan
Air Cooler
Liquid Cooler
 



 
Product > Power Supply > RevoBron > RevoBron TGA 700W
CABLES & CONNECTORS
 
Model Number:ERB700AWT
Native Cables
24P MB
1
(600mm)
4+4P (8P) CPU
1
(700mm)
Modular Cables
6+2P (8P) PCI-E
4
(500/150mm)
SATA
8
(450/150/150/150mm)
4P Molex
4
(450/150/150/150mm)
FDD (adapter)
1
(100mm)
Notice:

Your Enermax power supply is designed for enthusiast and high demand graphic professional that is looking at working with system that requires multiple GPU. However, configuring multi-GPU system requires proper planning to make sure you are not driving all currents through the same cable source that might overload both your motherboard and your power supply. Driving your GPUs on separate 12V rail is a good practice that most tech savvy user already aware of. Do you realize that your motherboard might be pulling too much current from your 24Pin power source and cause system damage?

For those elite user that is looking to put in 2 or more high end, power demanding GPU card, please choose the motherboard that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket on board and connect them with your Enermax power supply. This will prevent motherboard overloading and possibly cause damage to your system including your Enermax power supply. Once this occur, it will be treated as improper system configuration and any damage on the power supply as a result of it, will not be covered under Enermax manufacturer¡¦s warranty. Please refer to your motherboard¡¦s user manual to configure your system properly to prevent motherboard overloading damage to your system and your power supply.

Either sleeved or flat type modular cables in the box are all compatible with your newly purchased power supply.

Info for DC connector’s rated current:The safety current is 6A per single DC wire. Please be noted that overloading could cause the connector or wire meltdown and could void the warranty.

 

Fan Model Comparison
Model No. UCTBRGB12-SG
UCTBRGB12-BP3
UCTBRGB12-BP6
UCTBRGB12-SB UCTBRGB12-LF UCTBRGB12-TUF
Compatible Product(s) Retail Pack ENERMAX Case-SABERAY ENERMAX Liquid Cooler-LIQFUSION ENERMAX Power-RevoBron TGA
LED Type RGB RGB Addressable RGB
(Indivisual IC)
RGB
Speed 500-1500 RPM 1000RPM 500-2000RPM 1000RPM
RGB Connector
Pin Definition
Control Method Via T.B. RGB Control box Via RGB Header *Via Addressable RGB Header
(The RGB header 4-Pin assignment is+5V/ D/ -/ G)
Via RGB Header

* Please notice what type of the pin definition is supported by motherboard

 

 
 
 
COPYRIGHT© 2019 ENERMAX Technology Corporation. ALL RIGHT RESERVED.