CYBERBRON 600W

‧ 80 PLUS® Bronze certification
‧ Low-profile black flat cables
‧ Japanese electrolytic capacitors
‧ Single rail +12V design
‧ 120mm fan with intelligent RPM control

Energy conservation

 

80 PLUS® Bronze certification with 88% efficiency @50% load

Reduce unnecessary power consumption and excess heat to conserve energy to reduce carbon footprint and lower electric bill

80 PLUS® Bronze certification ensures lower power and excess heat with up to 88% efficiency @230VAC 50% load.

Easy Installation

 

Low-profile black flat cables

  • Easy to bend and be in storage inside the case
  • Make cable management easier and improve airflow inside the PSU-shroud design chassis

Longer product lifespan

 

Using Japanese electrolytic capacitors

Provide long-term durability and reliability to ensure PSU have longer lifespan

Silence Operation

 

Equipped 120mm fan with intelligent RPM control

Provide excellent balance between cooling performance and silent operation

User friendly

 

Single rail +12V design

Make GPU and CPU operate with less restriction to avoid shutting down from playing games or other heavy usage like computer graphics

Safety

 

Multiple protection circuitries of OVP, UVP, OPP and SCP

Multiple protection circuitry of OVP (Over Voltage Protection), UVP (Under Voltage Protection), OPP (Over Power Protection) and SCP (Short Circuit Protection) to give your system fully protection

 

ECB600AWT
Mainboard 24 Pin 1
[ 1x 60cm ]
CPU 4+4 Pin 1
[ 1x 60cm ]
PCI-E 6+2 Pin (8 Pin) 2
[ 1x 50/15cm ]
SATA 8
[ 2x 45/15/15/15cm ]
4x4 Pin Molex + 1xFDD 4 + 1
[ 1x 45/15/15/15/15cm ]

Notice:
Your Enermax power supply is designed for enthusiast and high demand graphic professional that is looking at working with system that requires multiple GPU. However, configuring multi-GPU system requires proper planning to make sure you are not driving all currents through the same cable source that might overload both your motherboard and your power supply. Driving your GPUs on separate 12V rail is a good practice that most tech savvy user already aware of. Do you realize that your motherboard might be pulling too much current from your 24Pin power source and cause system damage?

For those elite user that is looking to put in 2 or more high end, power demanding GPU card, please choose the motherboard that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket on board and connect them with your Enermax power supply. This will prevent motherboard overloading and possibly cause damage to your system including your Enermax power supply. Once this occur, it will be treated as improper system configuration and any damage on the power supply as a result of it, will not be covered under Enermax manufacturer¡¦s warranty. Please refer to your motherboard¡¦s user manual to configure your system properly to prevent motherboard overloading damage to your system and your power supply.

Either sleeved or flat type modular cables in the box are all compatible with your newly purchased power supply.

Info for DC connector’s rated current:The safety current is 6A per single DC wire. Please be noted that overloading could cause the connector or wire meltdown and could void the warranty.

Model ECB600AWT
80 PLUS® BRONZE
Modular Semi-modular
Cable type Balck flat
Total power (W) 600
Peak Power (W) 660
Input Voltage (V) 100-240
Input Current (A) 9
Input Frequency (Hz) 47-63
Fan size (mm) 120
Operating temperature (°C) 40
MTBF (hours) >100K
Protection OVP, UVP, OPP, SCP
Dimension (D x W x H), (mm) 150(W) x 86(H) x 140(D)mm

+3.3V(A) 19
+5V(A) 17
+12V1(A) 46
-12V(A) .3
+5Vsb(A) 2.5
Combined Wattage 12V (W) 552
Combined Wattage 3.3V + 5V(W) 110
EAN code 4713157724953
UPC code 819315024959
Box dimensions (D x W x H), (mm) 230 x 200 x 98
Gross Weight / unit (kg) 2.1

We use cookies to improve your browsing experience and our services by analyzing the use of the website.
By continuing to use this site you agree to their use. Click here for more information on our Privacy Policy.