MAXREVO 1800 Watt 80PLUS Gold Fully Modular Power Supply

‧ 1800 watt power in a compact design
‧ Dual 80 PLUS® Gold certification
‧ Patented Turbo Switch design
‧ 10-year warranty

Compact PCB Design

The high-density PCB design allows the MAXREVO 1800 to create a compact enclosure with a depth of only 18 cm and lower drag for better cooling of components

1800W* 80 PLUS®Gold PSU *1600W @ 115V


Dual 80 PLUS® Gold certification

MAXREVO 1800 is not only certified 80 PLUS® Gold with requirements of 87-90% efficiency for 20-100% load at 115V, but also 80 PLUS® GOLD 230V EU with requirements of 89-92% efficiency for 20-100% load at 230V


Patented Turbo Switch Design

For supercomputers, cooling the components under constant loads is one of the most important issues. The patented Turbo Switch sets the fan speed to the maximum speed of 3100 rpm, which can increase the cooling of critical components by 10-15°C compared to normal operation


The turbo cooling mode allows the power supply to deliver 1800 watts of continuous power at 55°C ambient temperature


The stronger air flow also helps to dissipate the heat inside the chassis


10-years warranty

High-quality components and service guaranteed by a 10-year manufacturer's warranty


100% 105°C Japanese electrolytic capacitors

For maximum durability and stability, MAXREVO 1800 is equipped with 100% 105°C Japanese electrolytic capacitors that can deliver up to 1800W*

*1600W@ 115V


Extreme density transformer

The innovative design increases transformer core utilization and reduces overall dimensions.

  1. Extreme power density performance
  2. 50% reduction in space compared to conventional design
  3. Excellent heat dissipation
  4. Low air resistance and less air friction noise

FMQ Design

Fully utilize transformer’s quad magnetic quadrants energy to provide maximum switching efficiency and outstanding stability


Zero load ready!

DC to DC converter circuit ensures stable output voltage and delivers higher efficiency



Fully modular cable design for easy system installation and improved airflow inside the case. Twelve 6+2P (8P) PCI-E connectors to power multiple high-end graphics cards


Multi Rail Design

Six powerful +12V rails with high output capabilities supporting high-end graphics cards for complex calculations



Multiple protection circuits for OCP, OVP, UVP, OPP, OTP, SCP and SIP protect your system


2013 ErP Lot 6 ready

MAXREVO 1800 helps systems to meet the EU eco-design directive 2013 ErP Lot 6 (< 0.5W in standby mode*) due to a high-efficient 5V standby (+5Vsb) circuitry


USB fan included

Limited edition with multifunctional USB cross-flow fan included

Mainboard 24 Pin 1
[ 1x 60cm ]
CPU 8 Pin 1
[ 1x 65cm ]
2xPCI-E 6+2 Pin (8 Pin) 12
[ 6x 50cm ]
8P & 4P 12V CPU/RAM 1
[ 1x 60cm ]
[ 3x 45/ 15/ 15/ 15cm ]
2xSATA + 2x4 Pin Molex 2 + 2
[ 1x 45/ 15/ 15/ 15cm ]
4x4 Pin Molex + FDD 8 + 2
[ 2x 45/ 15/ 15/ 15/ 15cm ]

For users that are looking to put in high end, power demanding GPU card, please connect 6 / 6+2P PCI-E connector(s) from your ENERMAX power supply to them correctly. This will prevent motherboard overloading and possibly cause damage to your system including your ENERMAX power supply. Once this occurs, it will be treated as improper system configuration and any damage on the power supply as a result of it, will not be covered under ENERMAX manufacturer’s warranty. Please refer to your motherboard & GPU card’s user manual to configure your system properly to prevent motherboard overloading damage to your system and your power supply.

Either sleeved or flat type modular cables in the box are all compatible with your newly purchased power supply. Please only use the modular cables provided in your ENERMAX power supply package. Do NOT use other modular cables to prevent pin configuration damage to your system and your power supply.

Info for DC connector’s rated current: The safety current is 6A per single DC wire. Please be noted that overloading could cause the connector or wire meltdown and could void the warranty.

80 PLUS Efficiency Gold
Modular Full modular
Cable type Sleeve
Total power (W) 1800
Input Voltage (V) 115-240
Input Current (A) 16-8
Input Frequency (Hz) 50-60
Fan size (mm) 135
Operating temperature (°C) 50
MTBF (hours) > 100k
Protection OCP, OVP, UVP, OPP, OTP, SCP, SIP
Dimension (D x W x H), (mm) 180 x 150 x 86
+3.3V(A) 25
+5V(A) 25
+12V1(A) 20
+12V2(A) 35
+12V3(A) 35
+12V4(A) 35
+12V5(A) 35
+12V6(A) 35
-12V(A) 0.5
+5Vsb(A) 4
Combined Wattage 12V (W) 1800
Combined Wattage 3.3V + 5V(W) 140
EAN code 4713157723734
UPC code 819315023730
Box dimensions (D x W x H), (mm) 380 x 370 x 115
Gross Weight / unit (kg) 5.86