Triathlor ECO 550W

Triathlor ECO 550W

COMPARE Compare List (0)

Features

  • 82PLUS ready!
    82-88% efficiency @ 20-100% load. Compliant with 80PLUS BRONZE efficiency requirements
  • 2013 ErP Lot 6 ready!
    Help system meet 2013 ErP Lot 6 (< 0.5W at standby mode) with high efficiency 5Vsb circuitry (With ErP Lot 6 enabled motherboard)
  • Hybrid modular & 100% flexible flat cable design
    Facilitate system installation, reduce cable clutter, and enhance internal airflow and cooling performance
  • Durable two ball bearing fan
    Durable two ball bearing fan with advanced fan speed control for optimal cooling, minimum noise, and longer lifetime
  • World famous brand main electrolytic capacitor
    Highest component standards for maximum durability and stability
  • Intel Haswell support
    Advanced technology of load balancer stablizes voltage output to support C6/C7 states of Intel Haswell CPU
  • 24/7 @ 40°C ready!
    Non-Stop industrial class performance at 40°C/104°F ambient.
  • World ready!
    100-240VAC input with automatic adjustment and Active PFC for global usage
  • SafeGuard
    Multiple protection circuitry of OVP, UVP, OPP, SCP, and SIP protect your system
  • SpeedGuard
    Advanced fan speed control for optimal cooling and minimum noise(Patented)
  • HeatGuard
    Keep PSU fan running for 30-60 seconds after shut down to dissipate the remaining system heat and prolong system lifetime
 
 

82PLUS ready!

 
 

HeatGuard

Keep PSU fan running for 30-60 seconds after shut down to dissipate the remaining system heat and prolong system lifetime

 
 

Hybrid modular & 100% flexible flat cable design

Facilitate system installation, reduce cable clutter, and enhance internal airflow and cooling performance

 
 

2013 ErP Lot 6 ready!

Help system meet 2013 ErP Lot 6 (< 0.5W at standby mode) with high efficiency 5Vsb circuitry (With ErP Lot 6 enabled motherboard)

 
 
ETL550AWT-M
Mainboard 24 Pin 1
[ 1x 60cm ]
CPU 4+4 Pin 1
[ 1x 60cm ]
2xPCI-E 6+2 Pin (8 Pin) 2
[ 1x 60cm ]
SATA 8
[ 2x 45/15/15cm ]
[ 1x 45/15cm ]
4x4 Pin Molex + FDD 4 + 1
[ 1x 45/15/15/15/15cm ]

Notice:
Your Enermax power supply is designed for enthusiast and high demand graphic professional that is looking at working with system that requires multiple GPU. However, configuring multi-GPU system requires proper planning to make sure you are not driving all currents through the same cable source that might overload both your motherboard and your power supply. Driving your GPUs on separate 12V rail is a good practice that most tech savvy user already aware of. Do you realize that your motherboard might be pulling too much current from your 24Pin power source and cause system damage?

For those elite user that is looking to put in 2 or more high end, power demanding GPU card, please choose the motherboard that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket on board and connect them with your Enermax power supply. This will prevent motherboard overloading and possibly cause damage to your system including your Enermax power supply. Once this occur, it will be treated as improper system configuration and any damage on the power supply as a result of it, will not be covered under Enermax manufacturer¡¦s warranty. Please refer to your motherboard¡¦s user manual to configure your system properly to prevent motherboard overloading damage to your system and your power supply.

Either sleeved or flat type modular cables in the box are all compatible with your newly purchased power supply. Please only use the modular cables provided in your ENERMAX power supply package. Do NOT use other modular cables to prevent pin configuration damage to your system and your power supply.

Info for DC connector’s rated current:The safety current is 6A per single DC wire. Please be noted that overloading could cause the connector or wire meltdown and could void the warranty.

80 PLUS Efficiency BRONZE
Modular Semi-modular
Cable type Sleeve
Total power (W) 550
Input Voltage (V) 100-240
Input Current (A) 8- 4
Input Frequency (Hz) 47-63
Fan size (mm) 120
Operating temperature (°C) 40
MTBF (hours) > 100k
Protection OVP, UVP, OPP, SCP, SIP
Dimension (D x W x H), (mm) 140 x 150 x 86
+3.3V(A) 18
+5V(A) 15
+12V1(A) 42
-12V(A) 0.3
+5Vsb(A) 2.5
Combined Wattage 12V (W) 504
Combined Wattage 3.3V + 5V(W) 120

© Copyright 2024 ENERMAX Technology Corporation.