CASES

Total two 360mm radiators installation at the top and in the front to keep system stay cool. 
RADIATOR SUPPORT - FRONT 360 / 280 / 240mm
RADIATOR SUPPORT - TOP 360 / 280 / 240mm
RADIATOR SUPPORT - REAR 120mm

Maximum 9 fans installation provides the best air-flow in the chassis. 
FAN SLOTS - FRONT 3 x 140mm / 3 x 120mm (Pre-installed 3 x 140mm SquA RGB HUB ARGB)
FAN SLOTS - TOP 2 x 140mm / 3 x 120mm
FAN SLOTS - REAR 1 x 120mm (Pre-installed 120mm SquA RGB)
FAN SLOTS - TUNNEL 2 x 120mm

2 ways to control addressable RGB lighting effects 

1. Through Motherboard Software
Users can sync the RGB lighting with motherboards featuring addressable RGB headers (3 pin assignment is 5V/D/G)
2. Through Computer Case
Users can use the *lighting control button to adjust Preferred lighting effects (13 pre-set lighting effects : Rainbow, Snake, Peach & Green scroll, Colors breathe, Colors scroll, Bilateral colors scroll, Red, Green, Blue, White, Yellow, Azure, and Peach.)

* Long press the lighting control button for 2~3 seconds to switch the RGB sync controlled by M/B or case
* The reset button located on the front I/O panel is replaced by the lighting control button

Support 360mm radiators installation in the front and 240mm radiators on the top. 
RADIATOR SUPPORT - FRONT 360mm/ 280mm/ 240mm
RADIATOR SUPPORT - TOP 240mm
RADIATOR SUPPORT - REAR 140mm /120mm

The interior space can install up to 6x120mm or 5x140mm fans or up to a 360mm radiator in the front. 
FAN SLOTS - FRONT 2 x 140mm / 3 x 120mm (3 x 120mm ARGB fans pre-installed)
FAN SLOTS - TOP 2 x 140mm / 2 x 120mm
FAN SLOTS - REAR 1 x 140mm / 1 x 120mm (1 x 120mm Non-LED fan pre-installed)

2 ways to control addressable RGB lighting effects 

1. Through Motherboard Software
Support motherboards that have a 5V addressable RGB header and be able to control the lighting effects through the motherboard software
2. Through Computer Case
MarbleShell offers 13 lighting effects allowing you to select your preferred lighting style through the top I/O port

* Long press the lighting control button for 2~3 seconds to switch the RGB sync controlled by M/B or case
* The reset button located on the front I/O panel is replaced by the lighting control button

Support 280mm radiators installation in the front and 240mm radiators on the top. 
RADIATOR SUPPORT - FRONT 280mm / 240mm
RADIATOR SUPPORT - TOP 240mm
RADIATOR SUPPORT - REAR 120mm

The interior space can install up to 6x120mm or 4x140mm fans or up to a 280mm radiator in the front. 
FAN SLOTS - FRONT 2 x 140mm / 3 x 120mm (2 x 120mm ARGB fan pre-installed)
FAN SLOTS - TOP 2 x 140mm / 2 x 120mm
FAN SLOTS - REAR 1 x 120mm (1 x 120mm Non-LED fan pre-installed)

2 ways to control addressable RGB lighting effects 

1. Through Motherboard Software
Support motherboards that have a 5V addressable RGB header and be able to control the lighting effects through the motherboard software
2. Through Computer Case
MarbleShell offers 13 lighting effects allowing you to select your preferred lighting style through the top I/O port

* Long press the lighting control button for 2~3 seconds to switch the RGB sync controlled by M/B or case
* The reset button located on the front I/O panel is replaced by the lighting control button

© Copyright 2024 ENERMAX Technology Corporation.